Cygnus Sails

Custom Wire Jib Halyard 3mm Stainless Steel Wire.

£33.95

Custom Wire Jib Halyard 3mm Stainless Steel Wire.

Custom Wire Jib Halyard 3mm Stainless Steel Wire.

For simplicity we can make any dinghy jib halyards , more often than not a custom length is required.

We make all our jib halyards to order and can generally despatch within 1-2 days.

We use marine grade stainless steel wire - 3mm Dia - 7 x 19 this is the most flixible available.

Blue wave thimbles.

Custom Jib Halyards come as standard with a 4.5m x 4mm Tail.

We suply with 1 x Hard Eye and 1 x soft loop generally 20cm long.

You can order on line as we price all our Jib Halyards up to 6m at the same price of £33.99.

This is Inclusive of UK Mainland Delivery

To Order ;

Go to custom Jib Halyards.(You are already on this product)

Order your Jib Halyard on Line for an all inclusive cost of £33.95

When you have placed the order just e mail us with;

The Length Required. This is the Bearing Surface - From the inside of the Hard Eye to the inside of the Soft Loop, (It is a good idea to keep these measurements on file for future reference)

Boat Class

Any Special requirements you can call us on 07850660225 and order by phone if you prefere.

E - Mail; info@cygnus-sails.co.uk



Read more

Custom Wire Jib Halyard 3mm Stainless Steel Wire.

£33.95

Custom Wire Jib Halyard 3mm Stainless Steel Wire.

For simplicity we can make any dinghy jib halyards , more often than not a custom length is required.

We make all our jib halyards to order and can generally despatch within 1-2 days.

We use marine grade stainless steel wire - 3mm Dia - 7 x 19 this is the most flixible available.

Blue wave thimbles.

Custom Jib Halyards come as standard with a 4.5m x 4mm Tail.

We suply with 1 x Hard Eye and 1 x soft loop generally 20cm long.

You can order on line as we price all our Jib Halyards up to 6m at the same price of £33.99.

This is Inclusive of UK Mainland Delivery

To Order ;

Go to custom Jib Halyards.(You are already on this product)

Order your Jib Halyard on Line for an all inclusive cost of £33.95

When you have placed the order just e mail us with;

The Length Required. This is the Bearing Surface - From the inside of the Hard Eye to the inside of the Soft Loop, (It is a good idea to keep these measurements on file for future reference)

Boat Class

Any Special requirements you can call us on 07850660225 and order by phone if you prefere.

E - Mail; info@cygnus-sails.co.uk


Cygnus Sails

Unit 18. Higher Trevibban Farm, St. Ervin, Wadebridge, Cornwall, PL27 7SH

Contact Cygnus

Tel: +44 7850 660 225

Email: info@cygnus-sails.co.uk