Laser 4000 Jib Batten Material 2m Length
£15.99
Laser 4000 Jib Batten Material.
Width.15mm
Length. 2m
Fitting.
Carefully undo app 6" of stitching in the middle of the batten pocket.
Cut the correct length of the batten.
We would advise you to tape the front end 6" (wrap the tape. PVC or similar over the end of the batten and up the batten app.6" both sides, so should the batten break again it is easy to remove)
Insert the front end (luff) through the undone area of the batten pocket.
Bend the batten and insert the back end (leach)
Line up the stitching holes and re-sew the batten pocket into place.
If you do not have the correct thread this is available on e-Bay or our web site.(cygnus thread kit:http://www.cygnus-sails.com/item-Cygnus_Thread_Kit.html )
The Price Is Inclusive Of UK Delivery